Cookology BUCH750SS Instruction Manual - Page 8
Browse online or download pdf Instruction Manual for Ventilation Hood Cookology BUCH750SS. Cookology BUCH750SS 12 pages.
Print Page
5.INSTALLATION
1) Remove the metal grease filter (A).
2) Create an opening in the underneath of the kitchen unit; the cut-out must
be of the dimensions shown in the "Specifications of your cooker hood"
5) Lift the cooker hood fully into the cut out that you made in step 2. If you
are connecting the cooker hood to external ducting, then secure the ducting
hose to the coupling on the appliance.
One person should support the hood. The other person should fully
o
tighten the support screws through the pre-drilled holes in the outer
frame of the hood, into the kitchen unit. Then replace the extractor
frame using the 2 screws (B) and reattach the 2 lights.
Refit the grease filter.
o
8
3) Make a hole in the inside of
the kitchen unit for the electrical
cable to feed through. Remove
the
2
screws
extractor frame (B) to the hood
and unscrew the 2 lights. Ensure
that the two support clips on
either side of the hood are set to
accommodate the thickness of
the
mounting
adjusting the clip via the screw.
4) Lift the cooker hood towards
the cut-out that you made in step
2.
Feed
the
through the hole that you made
in step 3.
IMPORTANT: Do not connect
the electrical cable to the mains
supply at this stage.
securing
the
surface,
by
electrical
cable