Cookology CGL100SS Instruction Manual - Page 9

Browse online or download pdf Instruction Manual for Ventilation Hood Cookology CGL100SS. Cookology CGL100SS 16 pages.

Print Page

3. After decide the cooker hood height, measure the position of the holes

for hanging hood and inside chimney bracket. Drill 4 φ8 holes, 2 for

inside chimney bracket and 2 for hanging the hood,and keep the hood

level. The fixed position of the inside chimney bracket is the highest

place of chimney. See pic 2.

4. Screw two 4 x 30mm screws on the wall with wall plugs to fix the

hood,then use two 4mm x 40mm screws to fix the inside chimney

bracket.See Pic 2.

5. Put the glass according to the lead direction and way on the cooker

hood, and then use the screws to fix the glass.Attach the expansion pipe

onto the one-way-valve as shown below,and fix the pipe on the valve by

cable tie, then lay the expansion pipe to the wall outlet. See pic 3.

6. Dress the inside chimney into the outside chimney. See Pic 4.

7. Make the hood hang on the wall in the fixed position, adjusting the

cooker hood position, fix the cooker hood with safety screws.See Pic 5.

8. Put the two chimneys together onto the cooker hood body, meanwhile

adjust the height of the inside chimney into the suitable height, and fix the

inside chimney to the inside chimney bracket by screw, here should be

sure the inside chimney can be flexed freely. See Pic 6.