Australian massage group AMG-3800 Operation Instructions Manual - Page 7
Browse online or download pdf Operation Instructions Manual for Massager Australian massage group AMG-3800. Australian massage group AMG-3800 10 pages. Four-wheel driven, muted, intelligent massage hands
Print PageMethod of Usage
•
Other manual functions
Function
Button
Calf Rest Lifting Button: Press this button, calf rest lifts slowly and stops when
Calf rise
released.
and drop
Calf Rest Decline Button: Press this button, calf rest declines slowly and stops
when released.
Backrest Lifting Button: Press this button, backrest lifts slowly and stops when
Backrest
released.
rise and
drop
Backrest Decline Button: Press this button, backrest declines slowly, stops
when released.
Total of 3 automatic reclined positions. In startup mode, the chair will
Auto lay
automatically recline to a comfortable seated position. Pressing the button
down
once will further recline the chair. To achieve the zero gravity position, press
mode
the button again.
3. Turn off power, stop massage
1) Pressing the power button during the massage will stop all functions, and the backrest and footrest
will return to its original position automatically. Meanwhile, you can set up the memory function. If the
rated working time finishes, the massage functions will turn off but the backrest and footrest won't
return to their original positions.
2) Memory Store Function: After the rated working time or product is switched off, the hand controller
displays "Memory", asking the user whether they would like to store the massage mode before turning
off the machine. You can press the memory function buttons "M1" or "M2" to store the massage mode.
3) Cut off the power of the whole machine.
Description
Method of Usage
4. Armrest disassembly method
Note: This method is only used if you cannot easily move due to small space. Please do not arbitrarily
disassemble.
•
Open the master box, take down the calf rest. (Figure 1)
•
Remove the back cushion. Ensure the heat wire in the cushion is unplugged before removing.
(Figure 2)
•
Zip the backrest kneading cloth open completely, and put the cloth on the top of the chair
(Note: Please remember to prevent the kneading cloth from getting dirty or damaged).
(Figure 3)
The calf rest decoration cover is a card slot design; please make an effort to pull it when
•
disassembling. (Figure 4)
•
Remove the 8 screws from the front dam-board, NOT the 4 screws on the bottom. (Figure 5)
•
Open the front dam-board, unplug the joint of the air pipe and the power cord that
corresponds to the armrest. (Figure 6)