AUSTRALIAN MONITOR AM1600 Operation Manual - Page 19
Browse online or download pdf Operation Manual for Amplifier AUSTRALIAN MONITOR AM1600. AUSTRALIAN MONITOR AM1600 20 pages. Professional audio power amplifier
Also for AUSTRALIAN MONITOR AM1600: Brochure (4 pages), Specification (2 pages), Owner's Manual (8 pages)
Print Page
AM1600 Specifications
Output Condition
E.I.A. Power
Single channel driven.
Both channels driven.
Bridge mode
Dynamic Power
20 cycles @ 0dB, 480 cycles @ -20 dB. re 4 ohm.
Distortion
(0.5 dB below clipping re 4 ohms)
THD+N
(@ 1 kHz)
IMD SMPTE
(60 Hz & 7 kHz 4:1)
IMD DIM 30
(3.15kHz square & 15 kHz) <0.007%
Output Impedance
Damping Factor
@ 1 kHz re 8 ohms
Output Rise Time
(80%, leading edge of 20kHz square wave)
Slew Rate
(leading edge, 20kHz square wave @ clipping)
Frequency Response
20 Hz - 20 kHz
-3dB points
Input Impedance
Line to Line (Balanced)
Input source = 600 ohm, Balanced and ground referenced (CMRR test had floating ground & 50 ohm
source). Mains regulated to 240 volts / 50hz. All measurements taken at binding post output terminals.
Standard production units measured. No compensation applied.
@ 1 kHz, <0.05 % THD+N.
@ 1 kHz, <0.05 % THD+N.
@ 1 kHz, at onset of clipping,
<0.005%
<0.015%
@ 1 kHz
<0.013 ohms
>650:1
<2.2 S
>65V per S
< -0.5, -0.15 dB
5 Hz - 90 kHz
18k ohms
Test conditions
Output Power
8 ohm
520W
470W
16 ohm 8 ohm
940W
950 Watts
Input Sensitivity
(nominally)
For rated power re 8 ohm
For rated power re 4 ohm
Voltage Gain
Input CMRR
@ 1 kHz (re 8 ohm rating)
Signal / Noise ratio
"A" weighted (re 8 ohm rating)
Crosstalk
@ 1 kHz (re 8 ohm rating)
Weight
Net 66.0 lb (30kg), Shipping 72.6lb (33kg)
Dimensions
excluding handles
including handles
(19 inch EIA rack mounting, 3 units high)
Specification 19
4 ohm
2 ohm
900W
1200W
810W
1050W
4 ohm
1620W
2100W
1.0 Vrms (+2.2 dBu)
0.92 Vrms (+1.5 dBu)
62 times (35.8 dB)
>90 dB
>105 dB
>90 dB
H
x W
x D
133 x 483 x 375
133 x 483 x 460
(mm)
(mm)