4Sight The Original Dash Cam User Manual - Page 5

Browse online or download pdf User Manual for Dash Cameras 4Sight The Original Dash Cam. 4Sight The Original Dash Cam 9 pages. 4sk98.1

Print Page

REC/SNAP button is used as the "play/pause" button for video previews. Press it once

to play a preview, press it again to pause the preview.

）

Delete function:

Enter preview mode. Press the MENU button to open the menu. Be sure the "Delete"

option is highlighted (use the UP and DOWN buttons if not highlighted). Press the

REC/SNAP button to choose the highlighted option (in this case the Delete option).

Use the UP or DOWN button to highlight "execute". Press the REC/SNAP button and

it will delete the file that was on screen when entering the menu. (Caution: when

selecting the delete file option, the file that was open when entering the menu is

deleted)

3.) Settings Menu functions:

After the device is powered on, stop recording by pressing the REC/SNAP button

then press the MENU button to enter the settings interface. Use the UP and DOWN

buttons to scroll through this interface. To choose the highlighted option, press the

REC/SNAP button. Use the UP and DOWN buttons to highlight your desired setting

and press the REC/SNAP button to assign this setting to the device. Press the MENU

button twice to exit the menu screen.

Video Output Menu:

1) Resolution: 720p (1280 x 720 HD); VGA (640 x 480)

2) Time Stamp: Off / On

3) Motion detection: On / Off

While the device is powered on, and motion detection is set to "on" the motion

detection system will cause the Dash Cam to automatically record for 1 minute

when it senses motion.

4) Video time (retro looping): Off / 1 min / 3 min / 5 min / 10 min

5) Voice record: On / Off

Capture Menu:

From video mode, press the 'mode' button to switch into still photo mode then press

the menu button to enter the 'capture' menu

Size: 3M / 2M / 1.3M/ VGA