4smarts Eara SkyPods Manual - Page 4
Browse online or download pdf Manual for Headsets 4smarts Eara SkyPods. 4smarts Eara SkyPods 8 pages.
Print Page
EN
I. Safety instructions
- Protect the device from dirt, moisture, overheating,
and extreme temperatures and only use it in dry
rooms.
- Do not drop the product and do not expose it to any
major shocks.
- Only use suitable charging devices or USB connec-
tions for charging.
- Do not overcharge the product or allow the battery
to completely discharge. Discharge & recharge the
product at least every 3 months.
- This product is no toy, and should not be given to
children.
- In case of a leaking batterie avoid a contact with skin
or eyes. If a direct contact occurs, wash with plenty
of water and consult a doctor.
- This product must only be built in and repaired by
professionals.
- Do not expose your ears to high volume for a long
period of time (max. 5 min. nonstop / overall max. 3
hours per week), to avoid hearing damage.
- Do not modify the product in any way. Doing so
voids the warranty.
II. Scope of delivery
- Headphones
- Charging cable
- Charging station
- Neck strap
III. Technical specifications
- Battery capacity per headphone: 30mAh
- Battery capacity charger: 500mAh
- Working Range: 30m
- Bluetooth version: 5.0
- Battery type: Lithium-Polymer
- Input Charging Station: DC 5V/500mA
- Transmission power: 2*3mW
- Distortion factor: <5%@1kHz, 1mW Sine Wave
- Acoustic Pressure Sensitivity: 95dB±3dB
- Maximum continuous output: 105dB@1kHz
IV. Picture description
1. Inside light
2. Charging sockets
3. Charging cradle
4. LED indicator
5. Micro-USB input
6. Charging contact
7. Multifunction key (answer, pause, play, on, off)
8. LED indicator
9. Microphone
10. Neck strap
11. Charging cable
V. Operation
- Connect the plug of the supplied cable (11) with the
related charging connector (5).
- Connect the other side of the cable (11) with a
suitable source of energy. Always consider the
mentioned voltage and power information on your
devices in this step.
- Wait until the product is fully charged before you
continue. Disconnect the cable after the charging, to
conserve the battery life.
- The LED indicator (4) illuminates permanently, as
soon as the battery is fully charged.
- Open the charging box (3) and take out the
headphones.
- Enter the Bluetooth settings of your smartphone and
search for following device: 4smarts SkyPods.
- The headphones now connect to each other
automatically. The LED of the main headphone
(=master headphone) will illuminate orange and
white alternately. This headphone will be the one,
connecting to your terminal device.
- After successful connection the status LED (8) of
both headphones stop illuminating.
- If you don't put the headphones back into the
charging box (3) for more than 10 minutes, they
will automatically switch off to save energy. You can
easily switch them on by holding both multifunction
keys (7) for 2 seconds simultaneously.
-
VI. Function notes
Recharging the charger:
- While charging the charging box via USB cable, the
LED indicator (4) of the charging cradle shows, how
much energy is already inside the charging box:
• 100%: Permanently lighting up
• 99-75%: 4x Flashing all 2 seconds
• 74-50%: 3x Flashing all 2 seconds
• 49-25%: 2x Flashing all 2 seconds
• <25%: 1x Flashing all 2 seconds
Recharging the headphones:
- As soon as you return the headphones into the char-
ging box (3) and close its lid, the headphones switch
off and change into charging mode. The premise for
this is, that the charging box has enough energy.
- As long as there is no USB cable connected, the LED
indicator (4) shows, if the inserted headphones are
being charged.
- Permanently lighting up: Headphones are being
charged.
- No lighting up: Headphones are fully charged.
General headphone controls:
- Keep the multifunction key (7) pressed for 6 seconds
to switch off one headphone. You can continue to
listen with one headphone to save the battery of the
other headphone for later. To do so, simply keep the