Brentwood Appliances KT-1792BK Operating And Safety Instructions Manual - Page 5

Browse online or download pdf Operating And Safety Instructions Manual for Kettle Brentwood Appliances KT-1792BK. Brentwood Appliances KT-1792BK 20 pages. Stainless steel electric kettles

Print Page
NOTE: Never fill the kettle when it is on its base.
1.
Place the base on a flat, stable, heat resistant surface away from water splashes
and any sources of heat. (Do Not Plug in to an outlet until ready for use.)
2.
Fill Kettle with desired amount of water (We recommend using distilled water.)
CAUTION: Do not overfill the Kettle or operate it when empty.
3.
Place lid back on Kettle and with a clean dry paper towel, wipe exterior bottom of
the Kettle and the base to confirm parts are completely dry.
4.
Position the kettle on its base.
5.
Keep 'Power Switch' on the 'O' (OFF) position before plugging base into an outlet.
6.
Once filled Kettle is on the base, plug into an electric outlet with dry hands.
7.
Turn the Kettle 'ON' by pushing the 'Power Switch' DOWN.
8.
The LED light around the kettle will illuminate blue to indicate the Kettle is heating.
9.
When heating is complete, make sure the power switch is UP on the 'O' OFF
position.
WARNING: Always unplug the product from the electrical outlet when it is not in
use or will be left unattended.
10. The Kettle will automatically switch to the 'O' (OFF) position once the water has
boiled. The indicator light will turn off.
11. There will be a 'click' sound coming from the kettle indicating it is now safe to
unplug the Kettle from the outlet.
NOTE: Make sure the 'Power Switch' is in the 'O' (OFF) position before removing
from base.
Note: The power switch only works when the Kettle is on the base and connected
to an electrical outlet.
12. Lift the Kettle up from the base, using its handle.
13. Pour hot water into a mug or container.
Note: If a second batch is needed, let the appliance rest for 60 seconds before
restarting.
SPECIAL NOTE:
This kettle has boiled dry protection. It will shut off if Kettle is empty.
NEVER run kettle when empty. Do avoid using the boiled dry automatic shutoff.
The Kettle was NOT designed to use this feature as the primary way to shutting
the appliance off.
Cleaning Your Kettle:
WARNING: Always unplug the product and allow it to cool before cleaning or storing.
NOTICE: To avoid damaging the product, do not pour cold water into the Appliance
after use and do not use abrasive cleaners/pads to clean any part of the product.
• Make sure the Kettle is empty and has had time to cool before handling it.
• Do not run any part of this appliance in the Dishwasher.
• Remove Kettle from base and clean with a non-abrasive cleaner and warm soapy
water.
5