AUTEC Air series Original Instructions Manual - Page 6

Browse online or download pdf Original Instructions Manual for Receiver AUTEC Air series. AUTEC Air series 16 pages. Receiving unit
Also for AUTEC Air series: Manual (8 pages), Manual (13 pages), Instruction Manual For The Use And The Maintenance (20 pages), Manual (12 pages), Instruction Manual For The Use And The Maintenance (20 pages), Original Instructions Manual (8 pages), Original Instructions Manual (8 pages), Manual (8 pages), Original Instructions Manual (8 pages)

Print Page
AUTEC Air series Original Instructions Manual
6
5

Light signals

In AJS transmitting units, a green and a red LED are always available, providing information
regarding the radio remote control.
The green LED...
...is off.
... is steady on.
... blinks fast.
... blinks slowly (one blink per
second).
The red LED ...
...is off.
... is steady on.
... blinks twice per second.
... blinks three times per second.
... is steady on for 2s.
... blinks slowly (one blink per
second).
... blinks fast.
For other LED signals, see Data Feedback function (paragraph 6.3).
LIAJSE00-00
A
Red LED
B
Green LED
The transmitting unit is switched off.
The transmitting and receiving unit do not communicate.
The transmitting and receiving unit communicate. It is
possible to start the radio remote control by pressing the
START pushbutton.
It is possible to send commands.
The transmitting unit works correctly.
At start-up, the STOP pushbutton is activated or damaged.
At least one of the commands that were checked at start-
up (see technical data sheet) is enabled or damaged.
At start-up,the battery is flat.
The transmitting unit does not work correctly.
The battery has a 2h run time.
The battery has a 10min run time.
Light signals
Meaning
Meaning
AUTEC - Air series