BENDIX BDW 52 Instruction Book - Page 7

Browse online or download pdf Instruction Book for Dishwasher BENDIX BDW 52. BENDIX BDW 52 9 pages. Dishwasher

Print Page

Adjusting the worktop

You can move the worktop forward or backward by

25 mm in order to align the machine with other kitchen units.

Simply unscrew the two rear retaining screws, move the top

to the required position and then retighten the screws.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine's worktop, you can install it under

a close fitting sink unit or a pre-existing top, providing the

dimensions of the recess correspond to those shown in the

picture.

Proceed as follows:

Remove the machine's worktop by unscrewing the

two rear retaining screws, pull from the front and

slide out the rear slots, lifting the worktop.

Insert the machine after adjusting height and levelling with

the adjustable feet. When inserting the machine, ensure that

the water inlet and drain hoses are not kinked or squashed.

Technical specifications

Dimensions

Electrical connection

Motor rating during wash

Power of heating element

Overall power

Water supply pressure

Capacity

IN26

IN05

Width

Height with worktop

Height without worktop

Max depth

Max depth with open door

Voltage

Minimum

Maximum

60 cm

85 cm

82 cm

55.5 cm

115,2cm

220/240 V - 50 Hz

200 W

2100 W

2300 W

50 kPa (0.5 bar)

800 kPa (8 bar)

12 place settings