Airwell RC 08B Manual - Page 4

Browse online or download pdf Manual for Remote Control Airwell RC 08B. Airwell RC 08B 7 pages.

Print Page

OPERATIION

COOLING

Verify that the unit is connected to the main

power and the STANDBY lamp is lighted up.

1. Press the ON/OFF (

) button and switch the

airconditioner ON.

2. Set the MODE selector to COOL

3. Press the - or +. buttons to set the desired

temperature The temperature range is between

17℃ and 30℃(62-88 F).

THE DISPLAY SHOWS THE

SELECTED TEMPERATURE..

4. Press the FAN SPEED button to select the fan

speed.

HEATING

1. Press the ON/OFF

(

)

button and switch the air condioner ON.

2. Set the MODE selector to HEAT

3. Press the + or -. buttons to set the desired temperature, the temperature range is

between 17℃ and 30℃( 62-88F).

4. Press the FAN SPEED button to select the fan speed.

THE DISPLAY SHOWS THE

SELECTED TEMPERATURE..

R P

MODE

CLR

TIMER

SLEEP

TURBO

CLEAN

I FEEL

EYE

ION

LIGHT

NOTE

For several minutes after the start of heating operation, the indoor fan will not run until

the indoor heat exchanger coil has warmed up sufficiently. This is because the COLD

DRAFT PREVENTION SYSTEM is operating.

DEFROSTING OF HEAT EXCHANGE / OUT DOOR UNIT "STANDBY"

When the outdoor temperature is low, frost or ice may appear on the heat

exchanger

coil, reducing the

heating performance.

microcomputer defrosting system operates. At the same time, the fan in the

indoor unit stops until defrosting is completed. Heating operation restarts after

several minutes. ( This interval will vary slightly depending on the room and

outdoor temperature).

HEATING PERFORMANCE

A heat pump air conditioner heats a room by taking heat from outside air. The

heating efficiency will reduce when the outdoor temperature is very low.

AUTOMATIC OPERATION

1. Press the ON/OFF (

) button and switch the air conditioner ON.

2. Set the MODE selector to AUTO

When this setting is selected, the air conditioner calculates the difference between the

thermostat setting and the room temperature and automatically switches to the COOL,

DRY or HEAT mode as appropriate.

3. Press the + or -. buttons to set the desired temperature, the temperature range is

between 17℃ and 30℃( 62-88F).

Note: You cannot switch the fan speed in AUTO mode, it has been automatically

controlled.

OPERATIION

When

this happens,