dymax ACCU-CAL 150 User Manual - Page 9

Browse online or download pdf User Manual for Measuring Instruments dymax ACCU-CAL 150. dymax ACCU-CAL 150 20 pages. Uv radiometer

Print Page

5. Exiting RUN mode: A short press of the STOP button (Soft Button display bar indicates STOP next to

the ON/OFF Button) will exit RUN mode and will return to the same default mode prior to making the

exposure run, but will show the new value.

Figure 3. Optics Window (Located on the Backside of the Radiometer)

Setup and Default Modes

To enter SETUP mode, press and hold the SETUP Mode Button located to the left of the Display Window for

0.5 second, then release. The Display Window will show the current settings. Default modes will appear with

an asterisk (*) before them. The Display Window below shows all possible choices for setup of each mode.

Figure 4. ACCU-CAL™ 150 Display Window

(Run Mode)

SETUP

*MODE:

*GRAPH

SMOOTH:

*OFF

UNITS:

*J/W

DISPLAYS:

LOW

*MEDIUM





SAVE

To change selections, use the buttons under the down  and right  arrows to scroll in the indicated

direction. To change the default selection, select the correct line, then select the setting on each line. Press

the SAVE button to save the setting as the new default. An asterisk (*) will appear next to the setting. When

changes are completed, press the EXIT button to return to the default mode.

REFERENCE

TOGGLE

mJ/mW

uJ/ uW

HIGH

EXIT

Dymax ACCU-CAL™ 150 Radiometer User Guide

Figure 5. ACCU-CAL™ 150 Display

Window (Setup Mode)