dymax ACCU-CAL 50-LD User Manual - Page 10

Browse online or download pdf User Manual for Measuring Instruments dymax ACCU-CAL 50-LD. dymax ACCU-CAL 50-LD 20 pages. Led radiometer

Print Page

Dymax ACCU-CAL™ 50-LED Radiometer User Guide

Testing Spot Lamp Systems

1. Attach the detector to the radiometer (Figure 6).

2. Select the lightguide adapter that matches the size of the spot lamp's lightguide. 3, 5, and 8-mm

lightguide adapters are supplied with the radiometer.

3. Install the lightguide adapter on the end of the detector using the two 2-mm adapter screws provided

(Figure 7).

Figure 6. Attach Detector

4. Insert the lightguide into the lightguide adapter until it bottoms out. Tighten the set screw when the

lightguide is installed.

Note: Do not over-tighten the set screw, as damage to the lightguide may occur.

Figure 8. Attach Lightguide Adapter to Lightguide

7. Press and release the On/Off button on the radiometer's face plate to turn the unit on.

8. On the radiometer's display, the top line displays the light source and the second line displays the mode.

9. Press and release the Light Source button to select the light source being measured. For spot lamps, use

the lightguide setting. Repeatedly press the Light Source button until the correct lightguide size appears

on the top line. The options are:

Figure 7. Adapter Installation