dymax ACCU-CAL 50-LD User Manual - Page 14

Browse online or download pdf User Manual for Measuring Instruments dymax ACCU-CAL 50-LD. dymax ACCU-CAL 50-LD 20 pages. Led radiometer

Print Page

Dymax ACCU-CAL™ 50-LED Radiometer User Guide



Direct readings at 0 mm working distance for repeatable measurements:

1. With the adapter installed, align the radiometer sensor by nesting the emitter faceplate onto

the adapter tabs to ensure precise engagement.

2. Keep the sensor and emitter square to each other and activate an exposure cycle of the

emitter.

3. Take intensity reading after 5-10 seconds to allow for output stabilization.

To avoid possible damage to the radiometer sensor, allow the sensor to cool between

measurements and do not expose the sensor to energy emissions for more than 15 seconds.

Figure 14. Adapter Alignment