Dymo ExecuLabel LP250 User Manual - Page 3

Browse online or download pdf User Manual for Label Maker Dymo ExecuLabel LP250. Dymo ExecuLabel LP250 15 pages. Professional labelmaker

Print Page

About Your New Labelmaker

With your new DYMO ExecuLabel

labelmaker, you can create a wide variety of high-

quality, self-adhesive labels. You can choose to

print your labels in many different sizes and styles.

The labelmaker uses DYMO D1 label cassettes in

widths of 1/4" (6 mm), 3/8" (9 mm), and 1/2" (12 mm).

Label cassettes are also available in a wide range

of colors.

Visit www.dymo.com for information on obtaining

labels and accessories for your labelmaker.

Warranty Registration

Please complete the warranty registration card and

return it to the appropriate Customer Support

address within seven days. Visit www.dymo.com/

registration for details or to register online.

Getting Started

Follow the instructions in this section to print your

first label.

Connecting the Power

The labelmaker is powered by standard batteries or

an AC power adapter. To save power, the

labelmaker will automatically turn off after two

minutes of inactivity.

Inserting the Batteries

The labelmaker uses six AA alkaline batteries.

To insert the batteries

1. Remove the battery compartment cover. See

Figure 2.

™

LP250

2. Insert the batteries following the

3. Replace the battery compartment cover.

not be used for a long period of time.

Connecting the Power Adapter

An optional AC power adapter can also be used to

power the labelmaker. Connecting the AC adapter

to the labelmaker disconnects the batteries as a

power source.

To connect the power adapter

1. Plug the power adapter into the power connector

2. Plug the other end of the power adapter into a

before you disconnect the power adapter from the

main power source. Otherwise, your most recent

memory settings will be lost.

Inserting the Label Cassette

Your labelmaker comes with one label cassette.

Visit www.dymo.com for information about

purchasing additional label cassettes.

Figure 2

polarity markings (+ and –).

Remove the batteries if the labelmaker will

on the top of the labelmaker.

power outlet.

Make sure the labelmaker power is turned off

AUS