Dymo LabelWriter Twin Turbo Quick Start Manual - Page 5
Browse online or download pdf Quick Start Manual for Label Maker Dymo LabelWriter Twin Turbo. Dymo LabelWriter Twin Turbo 8 pages. Dymo labelwriter twin turbo: product brochure
Also for Dymo LabelWriter Twin Turbo: Quick Start Manual (15 pages), Brochure (2 pages)
Print Page
3. Connecting your LabelWriter Printer
At some point during the software installation, you will be asked to connect your
LabelWriter printer to the USB port.
For Windows, do not connect the printer to
NOTE
your computer until instructed to do so during the
software installation.
To connect the power
1 Plug the power cord into the power adapter. See
Figure 4.
2 Plug the power adapter into the power
connector on the bottom of the printer. See
Figure 5. Make sure to push the plug in
completely.
3 Plug the other end of the power cord into a
power outlet.
To connect the USB cable
1 Plug the USB cable into the USB port on the
bottom of the printer. See Figure 5.
2 Insert the power and USB cables into the right and left
cable channels and set the printer down on your work
surface.
3 When prompted during the software installation and
while the printer is turned on, plug the USB cable into
an available USB port on your computer. See Figure 6.
Power Cord
Power
Cable
Channels
5
Power Adapter
Figure 4
USB
Figure 5
Figure 6