Dymo LM200 Instructions For Use Manual - Page 11

Browse online or download pdf Instructions For Use Manual for Label Maker Dymo LM200. Dymo LM200 12 pages. Electronic labelmaker

Print Page

example:

it. Each letter selects a line of symbol characters,

numbered 1 to 6, as shown in the table on page 2.

• Press

to cancel, or

DEL

• Press a letter key 'A' to 'Z' until you find the line of

symbols required. You can then press a number key '1'

to '6' to select the symbol required.

Alternatively, use

to Z, then use

symbol required.

Press

to place the symbol in the label.

PRINT CONTRAST — may be adjusted by pressing

SYMBOLS

followed by

symbols

• Use

to select lighter or darker print.

• Press

to confirm the setting. The contrast level will

revert to the mid-setting when the LabelManager is

turned off and on again.

Note: This function enables you to adjust the print

quality under extreme temperature conditions.

Cleaning

• Clean the cutter blade regularly: Press and hold down

cutter lever E to expose cutter blade D

cotton bud and alcohol to clean both sides of the blade.

Release cutter lever E.

• Check and clean print head face D

cotton bud and alcohol ONLY.

Troubleshooting

No display

• check machine is on

• replace discharged batteries

• check AC adaptor.

No printing or poor text

• replace discharged batteries

• check tape cassette installed correctly

• clean the print head

• replace the tape cassette.

Poor print quality with white ink

• When using a White on Black or a White on Clear

cassette, it may be necessary to use the darkest

contrast setting in order to obtain good print quality.

To change the contrast setting via the keyboard, read

and follow the instructions as described in the

paragraph "Print Contrast".

Tape jammed

• lift out tape cassette carefully

• remove/release jammed tape

• DO NOT cut the ink ribbon – turn spool

• cut off excess label tape

• refit/replace the tape cassette.

Poor cutter performance

• clean the cutter blade regularly

with a line of symbols above

to step through the rows A

to move the cursor under the

to display the contrast

, then use a

regularly using a

to tighten

No response to print key

• !!!!!!!!!!!!!!! in the display indicates a printer jam.

Press any key to return to normal display. Open the

cassette compartment and free the jam.

•

indicates discharged batteries. Press any key to return

to normal display. Replace the batteries.

No success?

• Call the DYMO customer service hotline telephone

number for your country – see the warranty booklet.

flashing in the display