Dymo RhinoPRO 5000 User Manual - Page 10
Browse online or download pdf User Manual for Label Maker Dymo RhinoPRO 5000. Dymo RhinoPRO 5000 13 pages. User guide
Also for Dymo RhinoPRO 5000: Quick Reference (2 pages), User Manual (14 pages), Technical Specifications (2 pages)
Print Page
To print multiple copies of the same serialized
label, choose
+
Print
copies of each label to print. See Printing Multiple
Copies on page 9.
Adjusting Print Quality (Advanced)
Depending on the label material you choose, you
may need to lighten or darken the print on the label.
Adjusting the print head temperature allows you to
control the print quality (+/- 20).
To set the print head temperature
1. Press
+
.
SAVE
2. Use the arrow keys to select the print head
temperature and press
3. Repeat as necessary until you are satisfied with
the print quality.
10
and enter the number of
.
Cleaning Your Printer
Your printer is designed to give you long and
trouble-free service, while requiring very little
maintenance.
Clean your printer from time to time to keep it
working properly. Clean the cutter blade each time
you replace the tape cassette.
To clean the cutter blade
1. Remove the tape cassette.
2. Press and hold down the cutter lever to expose
the cutter blade.
3. Use a cotton ball and alcohol to clean both sides
of the blade.
4. Release the cutter lever.
To clean the print head
Clean the print head using the cleaning tool
located inside the tape compartment lid.
RhinoPRO Label Cassettes
The following industrial label cassettes are
available for the RhinoPRO 5000 printer.
3/8"
Material Type
(9 mm)
Flexible Nylon
—
White
Flexible Nylon
—
Yellow
Permanent Polyester
18482
White
Permanent Polyester
18485
Metallic
1/2"
3/4"
Length
(12 mm)
(19 mm)
11.5'
18488
18489
(3.5 m)
11.5'
18490
18491
(3.5 m)
18.0'
18483
18484
(5.5 m)
18.0'
18486
18487
(5.5 m)