Dymo LabelWriter 450 Quick Start Manual - Page 8

Browse online or download pdf Quick Start Manual for Printer Dymo LabelWriter 450. Dymo LabelWriter 450 14 pages. How to order and insert a roll of labels in the dymo labelwriter
Also for Dymo LabelWriter 450: Quick Start Manual (20 pages), Overview (2 pages), Setup Manual (11 pages), Quick Start Manual (10 pages), User Manual (19 pages), Installation Manual (16 pages), How-To Manual (3 pages)

Print Page

Slide the spool guide onto the right side of the spool and press the

guide tightly against the side of the label roll, leaving no gap

between the roll and the spool. See Figure 6.

To ensure proper feeding of labels during printing, the label roll

NOTE

must fit snugly against both sides of the label spool, with no gaps.

Insert the label spool into the slot in the printer cover with the labels

extending from underneath the roll. See Figure 7.

Align the left edge of the label with the left edge of the label feed slot

and insert the label into the slot. See Figure 8.

The printer automatically feeds the label, stopping at the beginning of

the first label.

If the printer does not feed the labels, make sure the

first label is fully inserted and then press the form-feed

button.

If the first label on the roll is not a full label, press the

form-feed button to eject the partial label.

Slide the label guide to the left until the label guide

aligns with the right edge of the label. See Figure 8.

Make sure that the label guide does not pinch the label.

Carefully lower the top cover.

Align labels

against left edge

Figure 6

Figure 7

Slide label

guide against

labels

Figure 8