Dymo LabelWriter 450 Duo Label Printer Hardware Manual - Page 2

Browse online or download pdf Hardware Manual for Printer Dymo LabelWriter 450 Duo Label Printer. Dymo LabelWriter 450 Duo Label Printer 2 pages. Labelwriter series label printers
Also for Dymo LabelWriter 450 Duo Label Printer: Quick Start Manual (20 pages), Quick Start Manual (16 pages), Quick Start Manual (20 pages), Overview (2 pages), User Manual (19 pages), Quick Start Manual (8 pages)

Print Page
Dymo LabelWriter 450 Duo Label Printer Hardware Manual
KnT Loading Dymo Labels 2
Place the spool in the printer.
Feed the end of the labels into the printer, aligning the labels with
the left wall of the printer and against the label guide.
Press the form-feed button on the front of the printer. Gently close
the lid. An error light will blink if the paper isn't installed correctly. 
Your Light Guide
If you see a flashing blue light, it means the labels are not loaded
properly, or the label roll is empty.
A solid blue light means the power is ON and the printer is ready
to roll.
A dimmed blue light means the printer is in power-saving mode.
Note: Loading paper follows the same procedure.
Support
NOTE: These labels are heat sensitive. Do not expose to heat,
direct sunlight, or moisture while storing.
If you have any questions or need assistance using your Dymo
printer with KeepnTrack, please call KeepnTrack Technical
Support at 1-800-320-5830.