5Core 5C PDJ 2009 BT User Manual - Page 2

Browse online or download pdf User Manual for DJ Equipment 5Core 5C PDJ 2009 BT. 5Core 5C PDJ 2009 BT 2 pages. Personal dj system

Print Page

FEATURES

1. 2 wireless microphone, 1 wired microphone input, 1 AUX input, 1 guitar input

2. Standard match with 2 pcs wireless handheld microphone (optional)

3. Power supply: external AC power supply and built-in rechargeable battery

4. BASS and TREBLE gain control

5. ECHO control can meet your sound effect need

6. Body pack wireless transmitter can control the microphone volume

7. Mp3 player with USB/SD card input jack (optional)

8. Mic priority and Recording function available

9. DJ light available

CAUTIONS

1. Keep away from high temperature place such as exposed in sun long time or close to

any high-power equipment

2. Don't put this unit in any moist or dusty place.

3. Don't put this unit in any place there is not enough ventilation.

4. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

5. Unplug this apparatus when unused for a long period of time.

6. Only use the AC power voltage marked on the main unit, and follow this manual's

instruction.

7. It is danger to open this apparatus and put your hands into this unit, so please don't

open this apparatus. Please stop using the unit and send it to the service shops or

qualied technicians for repair when it is damaged.

• Make sure to leave 30cm room around the amplier to keep enough ventilation.

• Ventilation holes should not be covered with objects like newspapers, tale clothing

and curtains.

• Exposed re sources such as the lighting candles should not be placed on the

amplier.

• Please don't litter the used up battery and put it to relevant recycle box.

• The amplier should not be exposed to water drops or water splashed. Any objects

lled with liquid like the vases should not be placed on the top of the amplier.

OPERATION

1. HOW TO TURN ON THE UNIT

A. USING AC POWER:

• Refer to the marked AC power voltage on the main unit before plug in the power cord to

the AC power source to avoid any damage.

• Turn the POWER switch to ON position, the Power Indicator on the control panel bright up

in red, and the unit can work normally.

• Open the cover of the transmitter. Put the 1.5V battery in correct polarity, close the cover.

Insert the lapel microphone to the jack of the transmitter, keep the microphone away from

the mouth about 8-10 cm, turn on the transmitter, the POWER LED will ash once. (If the

POWER LED turn bright in long time, that means the batter is low voltage, it have to use a

new batter.) And the RF LED in Main Unit turns bright, adjust the transmitter and the

amplier's W/MIC1 or W/MIC2 volume knob to get the sound you need.

B. USING BUILT-IN RECHARGEABLE BATTEY:

• Connect the built-in battery with correct polarity.

• Don't connect the power cord to the AC power source, switch the power switch to

"POWER ON" position. When the POWER LED turns bright, the main power is supplied by

the built-in rechargeable battery. The rechargeable battery has low-voltage LED, if the

rechargeable battery voltage, and need to charge the battery immediately.

C. THE METHOD OF CHARGING THE BUILT-IN BATTERY:

• Connect the main power, press down the power switch to CHARGE position. The

charging indicator turns bright, and"the charging starts, when the battery is full, the green

LED glows. The charging nishes.

• If the amplier is not used for a long time, please charge the battery 8 hours each time.

2. H0W TO OPERATE THE BASIC FUNCTION

A. WIRELESS MICROPHONE INPUT

• Open the cover of the transmitter. Put the 1.5V battery in correct polarity, close the cover.

Turn the power switch to mid (standby) position, the POWER LED will ash. Turn on the

Main Amplier, pull out the antenna, the RF indicator turns right, and the speaker is in

MUTE status.

• Turn the switch to ON position on the transmitter, then the sound can come from the

speaker, adjust the W/MIC1 or W/MIC2 and ECHO knob and volume on the transmitter to

suitable position to avoid any feedback.

• If the POWER LED of the transmitter turn bright in long time, that means the batter is low

voltage, it have to use a new batter.

B. USB/SD CARD (Mp3 PLAYER) OPERATION

Insert the USB/SD card to USB/SD slot to play the MP3 format music in the USB or SD card.

PLAY: This is the PLAY/PAUSE button. Push this button to PLAY or PAUSE the playing of the

MP3 player.

NEXT/VOL+: This is the search forward and add volume of the MP3 player button, push it

once to search the next one, push twice to search next and next one; push it more than 3

seconds it will add the volume of the MP3 player.

PREV/VOL-:This is the search backward and reduce volume of the MP3 player button, push

it once to search the previous one, push twice to search previous and previous one; push it

more than 3 seconds it will reduce the volume of the MP3 player.

C. EXTERNAL AUDIO INPUT

Connect the CD, VCD, DVD, MP3 to the AUX (R/L) input jack, switch the AUDIO SELECT to

the correct mode, then adjust the volume knob to get the volume you need.