Dymo LabelWriter 400 Duo Guide Setup Manual - Page 8
Browse online or download pdf Setup Manual for Software Dymo LabelWriter 400 Duo Guide. Dymo LabelWriter 400 Duo Guide 11 pages. Desktop/pc connected labelmaker
Also for Dymo LabelWriter 400 Duo Guide: Instructions For Use Manual (13 pages), Setting Up (8 pages), Brochure (2 pages), Quick Reference Manual (8 pages), Brochure & Specs (2 pages), Contents And Installation (4 pages)
Print Page
- 1. Setting up a Dymo Labelwriter
- 2. To Install the DYMO Label Software on the Terminal Server
- 3. To Install and Test the DYMO Printer on the Local Workstation
- 4. To Allow Your Local USB Port to be Available During a Terminal Server Session
- 5. To Test the DYMO Printer through a Terminal Server Session
10.
11.
12.
13.
14.
8
Setting Up a DYMO LabelWriter 400, 450, or 450 Turbo Printer with Terminal Services
Click Save in the Connection settings box.
9.
The information that you set up becomes the default setting for
NOTE
all Remote Desktop connections on this computer and is saved
in a file called Default.rdp.
Click Connect to open a terminal server session.
Open the DYMO LabelWriter 400, 450, or 450 Turbo printer properties within
the terminal server session.
If the DYMO printer is not available within the terminal server,
NOTE
follow the instructions listed under
Software on the terminal server" on page
Select the Ports tab.
Select the TS### port that corresponds with the workstation that is attached
to the printer.
Click Apply to save your settings.
To test the DYMO printer through a terminal server session
From the computer attached to the DYMO LabelWriter 400, 450, or 450
1.
Turbo printer, open a terminal server session.
Open OfficeMate Administration or OfficeMate Enterprise Home Office.
2.
Click Setup and select Preferences.
3.
Select the Label Printer tab.
4.
Setting Up a DYMO LabelWriter 400, 450, or 450 Turbo Printer with Terminal Services
"To install the DYMO Label
3.