Dymo LabelWriter 450 Quick Start Manual - Page 5

Browse online or download pdf Quick Start Manual for Software Dymo LabelWriter 450. Dymo LabelWriter 450 10 pages. How to order and insert a roll of labels in the dymo labelwriter
Also for Dymo LabelWriter 450: Quick Start Manual (20 pages), Quick Start Manual (14 pages), Overview (2 pages), Setup Manual (11 pages), User Manual (19 pages), Installation Manual (16 pages), How-To Manual (3 pages)

Print Page
Dymo LabelWriter 450 Quick Start Manual
3. Connecting your LabelWriter Printer
Do not connect the printer to your computer
NOTE
until instructed to do so during the software
installation.
To connect the power
Plug the power cord into the power adapter.
1
See Figure 4.
Plug the power adapter into the power connector
2
on the bottom of the printer. See Figure 5.
Plug the other end of the power cord into a
3
power outlet.
Plug the USB cable into the USB port on the
4
bottom of the printer. See Figure 5.
Insert the power and USB cables through the
5
cable channel and set the printer down.
DO NOT CONNECT the other end of the USB cable to
NOTE
your computer until asked to do so during the software
installation.
When prompted by the software installer, plug the USB
6
cable into a USB port. See Figure 6.
4
PAGE 5 OF 10
Power cord
USB
Cable
channel
H-1265
Power adapter
Figure 4
Power
USB
24VDC
Figure 5
Figure 6
1013 IH-1265