Dymo LabelWriter 450 Duo Label Printer Quick Start Manual - Page 7

Browse online or download pdf Quick Start Manual for Software Dymo LabelWriter 450 Duo Label Printer. Dymo LabelWriter 450 Duo Label Printer 16 pages. Labelwriter series label printers
Also for Dymo LabelWriter 450 Duo Label Printer: Quick Start Manual (20 pages), Quick Start Manual (20 pages), Overview (2 pages), User Manual (19 pages), Quick Start Manual (8 pages), Hardware Manual (2 pages)

Print Page
Dymo LabelWriter 450 Duo Label Printer Quick Start Manual

4. Loading Labels

The LabelWriter Duo printer prints two types of labels: die-cut paper labels (such as Address or
Shipping labels) and D1 label cassettes.
Important!
In order for the labels to feed properly during printing, pay attention to the following when loading
labels on the spool and into the printer:
• The label spool guide must be pushed flush against the label roll, with no gap. See
Figure 6.
• The labels must be loaded with the left edge of the label inserted against the left edge of the
label feed slot. See Figure 8.
To load a label roll
Press the form-feed button to eject the labels that protected the
1
printer during shipment.
Open the top cover and remove any packing material inside the
2
label compartment.
Remove the label spool from inside the top cover and pull the spool
3
guide from the spindle.
Hold the spool spindle in your left hand and place the label roll on the
4
spindle so that the labels feed from underneath and the left edge of the label roll is firmly
against the side of the spool. See Figure 5.
Spool
Spool
spindle
guide
Figure 5
5