Dymo LabelWriter 450 Turbo Quick Start Manual - Page 7

Browse online or download pdf Quick Start Manual for Software Dymo LabelWriter 450 Turbo. Dymo LabelWriter 450 Turbo 20 pages. How to order and insert a roll of labels in the dymo labelwriter
Also for Dymo LabelWriter 450 Turbo: Quick Start Manual (14 pages), Overview (2 pages), Setup Manual (11 pages), Quick Start Manual (10 pages), User Manual (19 pages), Installation Manual (4 pages), How-To Manual (3 pages)

Print Page

Dymo LabelWriter 450 Turbo Quick Start Manual

4. Loading Labels

Important!

In order for the labels to feed properly during printing, pay attention to the following when

loading labels on the spool and into the printer:

• The label spool guide must be pushed flush against the label roll, with no gap.

See Figure 6.

• The labels must be loaded with the left edge of the label inserted against the left

edge of the label feed slot. See Figure 8.

To load a label roll

Press the form-feed button to eject the labels that protected the

printer during shipment.

Open the top cover and remove any packing material inside the

label compartment.

Remove the label spool from inside the top cover and pull the

spool guide from the spindle.

Hold the spool spindle in your left hand and place the label roll on the spindle so that

the labels feed from underneath and the left edge of the label roll is firmly against the

side of the spool. See Figure 5.

Spool

spindle

guide

Figure 5