Adel CBI2410A Instruction Manual

Browse online or download pdf Instruction Manual for Battery Charger Adel CBI2410A. Adel CBI2410A 4 pages. Intelligent battery charger

Print Page

CBI2410A – CBI2410A/S – CBI2410ARJ

Thank you for having chosen one of our products for your work. We are certain that it will give the utmost satisfaction and be a notable

help on the job.

General Description:

OUTPUT N°1

Battery module

OUTPUT N°2

Load Vdc Output

Monitor Led

Vac Input

Application

CBI battery charger is a range of microprocessor-power supplies witch correctly charge sealed lead-acid batteries at all time

maximizing performance and life span.

Charge the battery in multi-stage principle, Fast and Trickle and automatically the device, check the battery efficiency in a lifetime to

prevent any risk of damage to the battery and allow leaving the charger permanently connected. Before begin the operations of

installation consult the manual.

Mains Characteristic

Nominal Input Voltage: 115 / 230 Vac

OUTPUT 1: for connection to Battery

OUTPUT 2: for connection to Load

Fast and trickle battery charge In according to DIN 41773

Signaling: replace battery, low battery, mains or buffering

Overload and short circuit protections

Safety isolation in according with EN 60950

Output 24 Vdc 10 A 50° C also without mains

Degree of protection IP20

Rail DIN mounting

ADEL system srl Via L. Barchi 9/B, 42100 Reggio Emilia (Italy) – Tel. ++39-0522-345518

Fax. ++39-0522-345551 – Internet: www.adelsystem.com – e-mail: [email protected]

Intelligent Battery Charger

Mains or

Backup

Low

Battery

Battery replacement

Charging Level

Battery Type

Configuration Jumper

Bridge

Only 115Vac

CBI2410A_R8 Eng.doc