5G HUB QCOM tool User Manual - Page 10

Browse online or download pdf User Manual for Computer Hardware 5G HUB QCOM tool. 5G HUB QCOM tool 14 pages.

Print Page

Click "Close Port" to close the selected COM port. Please refer to Figure 10.

4.3 Send Data

To send data from the QCOM tool, follow the following steps:

Red

area is used to input data which would be sent.

Green

area is used to choose file needed and send a whole file.

Blue

area is used to save received data as a file.

4) DTR: Enable the DTR pin of COM port.

5) RTS: Enable the RTS pin of COM port.

6) View File: Show the data of the file which has been sent.

7) Show Time: Show the time of each received data.

8) HEX String: The input string is HEX string.

9) Show in HEX: The received data is shown in HEX.

10) Send with Enter: Send data with "Enter".

11) Clear Information: Clear all received data and status information.

12) Send Command: Start to send the data which you input.

13) Select File: Select the file which would be sent.

14) Send File: Start to send the file that you have selected.

15) Save Log: Select the file of which the Log data was saved.

QCOM Tool v1.6

Figure 9: Clicking "Open Port" button.

Figure 10: Clicking "Close Port" button.