Gage CS1220 Hardware Manual - Page 9

Browse online or download pdf Hardware Manual for Measuring Instruments Gage CS1220. Gage CS1220 17 pages.

Print Page

CompuScope 1220 specifications

PLEASE CHECK THE GAGE WEBSITE FOR THE MOST UP-TO-DATE SPECIFICATIONS.
SYSTEM REQUIREMENT
PCI-based computer with at least one free full-length PCI slot, 128 MB RAM, 50 MB hard disk and SVGA
video.
SIZE
Plugs into one full-length PCI slot, 13" x 4.1".
1 M Acquisition Memory
4 M Acquisition Memory
8 M Acquisition Memory
64 M Acquisition Memory
256 M Acquisition Memory
512 M Acquisition Memory
1 G Acquisition Memory
POWER (IN WATTS)
+ 5 Volts
Acquisition
Memory
Worst Case
1M
25.0 W
4M
28.0 W
8M
28.0 W
64M
32.5 W
256M
32.5 W
512M
32.5 W
1G
32.5 W
Note: Power connector on the deep memory board of 64M, 256M, 512M and 1G models must also be connected
using a Y-cable.
CHANNELS A & B
Inputs per card:
Impedance:
Coupling:
Connector:
Resolution:
A/D Type:
Input Voltage Ranges:
± 50 mV, ± 100 mV, ± 200 mV, ± 500 mV,
± 1 V, ± 2 V, ± 5 V, ± 10 V
Analog Bandwidth:
CompuScope 1220
1 slot
2 slots
2 slots
3 slots
3 slots
3 slots
3 slots
Typical
17.5 W
20.5 W
20.5 W
23.5 W
23.5 W
23.5 W
23.5 W
2 single-ended inputs
1 MΩ, 35 pF or 50 Ω, software selectable
AC or DC
1 BNC per channel
12 bits
Monolithic, 16 bit oversampling with decimation filter, operating in 12 bit mode
Input Range
-3dB Point
± 10 V
± 5 V
± 2 V
± 1 V
± 500 mV
± 200 mV
± 100 mV
± 50 mV
5 MHz
5 MHz
10 MHz
10 MHz
10 MHz
10 MHz
10 MHz
10 MHz
9