Gage Bilt GB703SRVT/4N6E Installation Manual - Page 4

Browse online or download pdf Installation Manual for Tools Gage Bilt GB703SRVT/4N6E. Gage Bilt GB703SRVT/4N6E 14 pages.

Print Page

PRINCIPLE OF OPERATION

When the lever assy is depressed, the pressurized air inside of the tool is released allowing spring pressure to move the valve spool

assy causing the air to be redirected. The air is directed to the top of the air piston assy, moving it in a downward direction. The air

below the air piston assy is then directed through the valve sleeve and exhausted out of the bottom of the tool. Simultaneously, the

piston rod assy connected to the air piston assy is also moving down, forcing hydraulic oil up and into the front side of the head

cylinder assy, causing the piston to move to the rear of the head cylinder assy. The internal components of the attached nose

assembly are also moving with the piston to start the fastener installation. When the fastener installation is completed, the lever assy

is released. Air pressure is then built up inside of the handle assy causing the valve spool assy to return to its original position and

reversing the sequence directing air pressure to the rear of the head cylinder assy, causing the piston to move to the forward position.

Image may not reflect actual tool

11/14