Gage Bilt GB713 Installation Manual - Page 10

Browse online or download pdf Installation Manual for Tools Gage Bilt GB713. Gage Bilt GB713 14 pages.
Also for Gage Bilt GB713: Original Instructions Manual (18 pages), Original Instructions Manual (20 pages)

Print Page
Gage Bilt GB713 Installation Manual
HEAD
WARNING:
Dispose of hydraulic oil in accordance with all environmental regulations applicable in your area.
Remove nose assembly from tool before attempting disassembly of head assy.
Remove end cap (713217). Push against threaded end of piston (713211) to slide it out of head cylinder assy (713121). Be careful not
to damage threads or cause burrs on polished piston (713211) surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque
the four button-head cap screws (402479) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
7/11 REV 10/14
10