Gage Bilt GB713 Original Instructions Manual - Page 13
Browse online or download pdf Original Instructions Manual for Tools Gage Bilt GB713. Gage Bilt GB713 18 pages.
Also for Gage Bilt GB713: Installation Manual (14 pages), Original Instructions Manual (20 pages)
Print Page
WARNING:
Disconnect tool from its power source before actuator removal or installation. Severe personal injury may
occur if power source is not disconnected.
CAUTION:
Air actuator assy can break if not careful.
CAUTION:
Do not over tighten air actuator assy. Snug tighten only.
REMOVING 704130 AIR ACTUATOR ASSY
1.
Insert a 5/8" (15.9 mm) open end box wrench around air actuator assy (704130).
2.
Loosen the air actuator assy (704130).
3.
Remove wrench. Unthread and remove the air actuator assy (704130) with fingers
from the handle assy (744129).
INSTALLING 704130 AIR ACTUATOR ASSY
1.
Apply Teflon® tape onto threads of air actuator assy (704130) one to two wraps.
2.
Thread the air actuator assy (704130) all the way into handle assy (744129) with fingers.
3.
Insert and turn 5/8" (15.9 mm) wrench and snug tight approximately 1/4-1/2 turn.
GB713
OVERHAUL
AIR ACTUATOR
13
7/11 REV 6/16