Agria Hydrasplitter VTL Manual - Page 4

Browse online or download pdf Manual for Tractor Accessories Agria Hydrasplitter VTL. Agria Hydrasplitter VTL 17 pages.

Print Page

The Hydrasplitter is designed to mount to the three point linkage of a

tractor.

To install the machine onto your tractor:

1) Place the splitter on a firm and stable platform at a minimum

of 300mm high.

2) Remove the lynch pins from the lower two link pins and

remove the top link pin and set aside.

3) Reverse tractor to the splitter and mount the lower link arms to

the lower link pins using bushes if need be.

4) Connect the top link to the top link pin in the splitter, ensuring

all three lynch pins are returned and locked in place.

5) Adjust the top link pin to make the splitter level.

6) Connect the two hoses to the tractor hydraulics.

performance connect return line from valve to a free dump port returning

oil directly to transmission)

NOTE: A pressure and return circuit is necessary as well as a detent on the

hydraulic remote control lever on the tractor

Ensure the tractor hand brake is engaged

You can now start your splitting operation.

1) Start the tractor and engage the hydraulic control to give you

oil flow to the splitter.

2) Place wood rings close to the anvil, remove all hands from

the splitting area and move the lever to the left (TPL), or

down (VTL).

3) When the wood has split, move the lever to the hard right

(TPL), or fully up (VTL), which will automatically return the

ram and reset the lever to the neutral position.

On completion of splitting the ram must be fully retracted so that

the Hydrasplitter can be re-connected with the ram in this position.

- 4 -

Connection

Operation

(For optimum