Gage Bilt GB3585A Original Instructions Manual - Page 4

Browse online or download pdf Original Instructions Manual for Power Tool Gage Bilt GB3585A. Gage Bilt GB3585A 20 pages. Installation tool

Print Page

WARNING:

Any other use is forbidden.

The GB3585 and the GB3585(A) are hydraulic installation tools designed specifically for the efficient installation of 1/2" - 3/4" diameter

pintail-style lockbolts only. They have a pintail ejector to eject broken pintails from the nose assembly.

It weighs just over 19 lbs. (18.6 kg). and can be operated in any position. It has a 1.810" (46 mm) fastener stroke and a rated pull load

of 45,668 lbs. (203 kN) @ 7,400 psi. (510 bar).

The GB3585 electric actuated installation tool operates on hydraulic pressure developed by the GB940 or equivalent power unit set at

7,400 psi (510 bar) maximum PULL pressure and 2,200 psi. (152 bar) maximum RETURN pressure. The tool comes equipped with

3 feet (.91 m) of hydraulic hoses and couplings, electric switch and cord.

The GB3585(A) air actuated installation tool operates on hydraulic pressure developed by the GB910, GB912 or equivalent power unit

set at 7,400 psi (510 bar) maximum PULL pressure and 2,200 psi. (152 bar) maximum RETURN pressure. The tool comes equipped

with 3 feet (.91 m) of hydraulic hoses, swivels and couplings, air actuator and tube.

ALL GAGE BILT HYDRAULIC INSTALLATION TOOLS ARE COMPATABLE WITH HUCK® POWERUNITS. NOSE ASSEMBLIES ARE

NOT FURNISHED WITH THESE TOOLS AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart on pg. 15).

WARNING:

Do not operate in an explosive atmosphere.

The GB3585 and GB3585(A) can be operated between 0ºF - 118ºF (-17.8ºC/47.8ºC)

GB3585/GB3585A INSTALLATION TOOL

DESCRIPTION

ENVIRONMENTAL USE

TECHNICAL SPECIFICATIONS

Weight

Max Hyd. pressure req'd

Hyd. Power Source

Hydraulic Oil

Setting stroke

Rated pull load

Noise level

Vibration

Max Flow Rate

Max Inlet Temperature

- 19 lbs. (8.6 kg)

- 7,400 psi (510 bar) MAX PULL

2,200 psi (152 bar) MAX RETURN

- GB940 Powerunit or equivalent

- GB910 or GB912 Powerunit or equivalent

- See power unit for hydraulic oil specifications

- 1.810" (46 mm)

- 45,668 lbs. (203 kN) @ 7,400 psi (510 bar)

- No noise hazards identified.

- Tested– No vibration hazards.

- 2 gpm (7.5 L/M)

- 118º F (47.8º C)

5/19