Gage Bilt GB2620 Instructions Manual - Page 4

Browse online or download pdf Instructions Manual for Rivet Tools Gage Bilt GB2620. Gage Bilt GB2620 20 pages.

WARNING:

Any other use is forbidden.

The GB2620 and the GB2620A are hydraulic installation tools designed specifically for the efficient installation of 1/2" diameter lockbolts only.

It weighs 9 lbs. 14 oz. (4.5 kg). It has a 1.437" (36.5 mm) rivet setting stroke and a rated pull load of 17,745 lbs. (78.9kN) @ 6,500 psi. (448.2 bar).

The GB2620 electric actuated installation tool operates on hydraulic pressure developed by the GB947 or equivalent power unit set at

7,400 psi. (510.2 bar) maximum PULL pressure and 3,200 psi. (220.6 bar) maximum RETURN pressure. The tool comes equipped with

2 feet (.61 m) of hydraulic hoses and couplings, electric actuator and cord.

The GB2620A air actuated installation tool operates on hydraulic pressure developed by the GB910, GB912 or equivalent power unit set at

7,400 psi (510.2 bar) maximum PULL pressure and 3,200 psi. (220.6 bar) maximum RETURN pressure. The tool comes equipped with

2 feet (.61 m) of hydraulic hoses, swivels and couplings, air actuator and tube.

ALL GAGE BILT HYDRAULIC INSTALLATION TOOLS ARE COMPATABLE WITH HUCK® POWERUNITS. NOSE ASSEMBLIES ARE

NOT FURNISHED WITH THESE TOOLS AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart on pg. 15).

WARNING:

Do not operate in an explosive atmosphere.

The GB2620 AND GB2620A can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)

GB2620 / GB2620A INTALLATION TOOL

DESCRIPTION

ENVIRONMENTAL USE

SPECIFICATIONS

Weight

Hyd. pressure req'd

Hyd. Power Source

Hydraulic Oil

Setting stroke

Rated pull load

Noise level

Vibration

Max Flow Rate

Max Inlet Temperature

- 9 lbs. 14 oz. (4.5 kg)

- 7,400 psi (510.2 bar) PULL

3.200 psi (220.6 bar) RETURN

- GB947 Powerunit or equivalent

- GB910 or GB912 Powerunit or equivalent

- See power unit for hydraulic oil specifications

- 1.437" (36.5 mm)

- 17,745 lbs. (78.9 kN) @ 6,500 psi (448.2 bar)

- No noise hazards identified. (20 max dB(A)

- Tested – No vibration hazards.

- 2 gpm (76L/M)

- 118º F (47.8º C)

REV. 4/23