Gage Bilt GB722 Installation Manual - Page 9

Browse online or download pdf Installation Manual for Rivet Tools Gage Bilt GB722. Gage Bilt GB722 13 pages. Installation tool
Also for Gage Bilt GB722: Original Instructions Manual (20 pages), Original Instructions Manual (20 pages)

Print Page

HEAD

Remove nose assembly from tool before attempting disassembly of head cylinder assembly (752119). Remove end cap (722317).

Push against threaded end of piston (752507) to slide it out of head cylinder assy (752119). Be careful not to damage threads or cause

burrs on polished piston rod surface.

WARNING:

Dispose of Hydraulic Oil in accordance with applicable regulations.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.)

Apply Loctite® #242 and torque the four socket-head cap screws (A-928) uniformly to 40 inch lbs. to prevent leakage around the

gasket (704129).

S/N: 1753 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

REV. 1/15