Gage Bilt GB7624A Original Instructions Manual - Page 7

Browse online or download pdf Original Instructions Manual for Rivet Tools Gage Bilt GB7624A. Gage Bilt GB7624A 20 pages.

When the tool is connected to a powerunit, operation is controlled by the electric actuator. When the button is depressed, a directional
valve in the powerunit directs oil to the front side of the piston forcing it and the nose assembly collet rearward. This action causes
the jaws to clamp onto the fastener pintail and pull the sheets together. The anvil is forced forward, swaging the collar into locking
grooves of the fastener. Further force breaks the pintail off, approximately flush with the collar.
When the button is released the directional valve reverses oil flow to the back of the piston and pushes the nose assembly off the
swagged fastener. The pintail ejector hydraulically pushes the spent pintail out of the nose assembly.
Note: GB7624 Nose assembly attachment video located on our website at : http://www.gagebilt.com/
rivet_tools_videos.php may be viewed to review this procedure.
Pintail
Piston Travel
Ejector
Actuator
PULL Cycle
GB7624 S/N: 1140 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

PRINCIPLE OF OPERATION

HYDRAULIC DIAGRAM
PULL Pressure
RETURN Pressure
located behind / in line with
pull pressure
Pressurized Oil
Unpressurized Oil
Image may not reflect actual tool
7
Piston Travel
Actuator
RETURN Cycle
Rev. 4/22