Great American Starter Paw Pal KPAW9 Installation Manual - Page 2

Browse online or download pdf Installation Manual for Pet Care Product Great American Starter Paw Pal KPAW9. Great American Starter Paw Pal KPAW9 2 pages. Pet waste station

Print Page

1. Pole Installation

18"

Need Help? Give us a call!

Using a post hole driver (not included), drive the sign post (C) approximately 15-18" into

the ground. Make sure that the "hollow" or "recessed" side of the post is facing where

you want the front of the unit to face. Use a level (not included) to ensure the pole is

standing upright and will properly support the unit. Adjust if necessary.

2. Station Assembly

1. Using the first hardware set (D), secure the sign (A) to the top of the steel post (C) with

a bolt and washer at the top of the sign and another at the bottom. The washers should

be next to the printed side (front) of the sign and the nuts are secured on the outside/

back of the post. To ensure the best outcome, make sure the sign is flush with the top of

the pole.

2. Using the second hardware set (D), attach the dispenser box (B) directly under the

sign leaving about 1" in-between. Open the box, align the holes to the steel post and

attach with the two bolts. The washers should be used on the inside of the box with the

nuts secured to the outside/back of the post.

3. Station Preparation

Open the dispenser box and insert up to 10 header cards of bags (E) onto the prongs in-

side the dispenser. Close the station, pull the top bag through the hole and you're all set!

Note: This dispenser fits all types of bags. If you are using boxed bags (Item PAWBAG3), you will

need to slip a converter (Great American Item PAW22) onto the prongs inside the dispenser and

insert the boxes into the converter.

Please contact us immediately if you have any missing or damaged items

or need any additional assistance. Thank you.

Great American

•

1-800-231-0329

•