Great American Recreation Power Hockey Overhead Assembly Instructions Manual - Page 12
Browse online or download pdf Assembly Instructions Manual for Arcade Game Machines Great American Recreation Power Hockey Overhead. Great American Recreation Power Hockey Overhead 13 pages.
Print PagePuck Lockout Soleniod Installation
1. Remove the side covers from the overhead score unit by removing two phillip screws on
each end cap.
2. Disconnect the 3 wire connections for the overhead score unit.
3. Remove overhead score unit by removing 4 bolts in the side mounting bracket.
4. Open the side door and unplug the black blower cord (very important) which is located
on the side of the power supply unit.
5. Remove all screws around the top outside edge of the table (located below the top rails)
and remove top rails and play field.
6. At each goal end, inside the table, are the puck lock out solenoids. Remove the 2 bolts
and 3 wires (black, white & green). Before removing wires, please note the position of
each wire for reassembley
6. Then install new solenoids and reassemble table using the steps above as a guide.