Gaggenau BO 420 2 Series Instruction Manual - Page 8

Browse online or download pdf Instruction Manual for Oven Gaggenau BO 420 2 Series. Gaggenau BO 420 2 Series 20 pages.

Print Page
Gaggenau BO 420 2 Series Instruction Manual
Familiarising yourself with your appliance
en

Display and operating controls

These instructions are valid for different versions of the
appliance. There may be minor differences depending
on the appliance model.
All versions of the appliance are operated in an identical
manner.
1
Control panel
These areas are touch sensitive.
Touch a symbol to select the cor-
responding function.
2
Display
The display shows, for example,
current settings and options.
3
Rotary selector
You can use the rotary selector to
set the temperature and to make
further settings.
4
Function selector The function selector is used to
select the type of heating, the
cleaning function or the basic set-
tings.
--------

Symbols

Symbol
Function
I
Start
Ø
Stop
H
Pause/End
'
Cancel
Ž
Delete
™
Confirm/save settings
C
Selection arrow
!
Open appliance door
(
Call up additional information
'
Rapid heating with status indicator
i
Call up individual recipes
8
g
Record menu
%
Edit settings
4
Enter name
l
Delete letters
0
Child lock
M
Call up timer menu
/
Call up long-term timer
°
Demo mode
E
Network connection (Home Connect)
--------

Colours and display

Colours
The different colours are used to guide the user in the
relevant setting situations.
Orange
Initial settings
Main functions
Blue
Basic settings
Cleaning
White
Values which can be set
Appearance
Depending on the situation, the appearance of symbols,
values or the entire display changes.
Zoom
The setting that you are changing
will appear larger on the display.
If you have set a time and it is about
to run out, it will appear larger on
the display just before it runs out
(e.g. 60 seconds before the end, if
you have set the timer).
Pared-down
After a short while, the amount of
display
information shown on the display
will be reduced and only the most
important information will
remain.This function is pre-set and
can be changed in the basic
settings.