Dawson DCM201A User Manual - Page 5

Browse online or download pdf User Manual for Measuring Instruments Dawson DCM201A. Dawson DCM201A 17 pages. Digital clamp meter

Print Page

Meter from maximum range and then adjust accordingly.

7. Remove the leads from the circuit first before switching

between functions.

8. Do not power the circuit when measuring resistance,

capacitance or diodes.

9. Do not measure the capacitance before the capacitor is

discharged.

10. Do not operate the Meter near explosive gas, vapor or under

dust.

11. Stop the operation if the Meter or test leads appeared

damaged or do not function properly.

12. Unless the battery cover and the Meter case are firmly closed,

do not use the Meter.

13. Do not expose the Meter to direct sunlight, heat, or moisture.

Components and Buttons

Risk of danger. (Important information. See User's Manual)

May be used on hazardous live conductors.

Double insulation（type II）

CAT III Conforms to IEC-61010-1Over-Voltage standard

categories III.

Conforms to relevant European Union directives

Earth ground

1. Clamp Jaws：Measure Current

2. Clamp Light

3. Panel

4. Clamp trigger

5. Function Button (FUNC）

6. Relative Button (REL)

7. Frequency/Duty Ratio Button (Hz/%)

8. LCD Display

9. Common Input Terminals

10. Resistance, Capacitance, Voltage, Frequency, Diodes and

continuity Input Terminal

11. Min Max Button(MAX/MIN)

12. Display Hold / Back Light Button(B.L/ HOLD)

13. Rotary Switch

14. NCV Indicator