Airwheel H8 User Manual - Page 3

Browse online or download pdf User Manual for Wheelchair Airwheel H8. Airwheel H8 13 pages.
Also for Airwheel H8: User Manual (16 pages)

Print Page

Installation and Usage

②

①

Figure 1

Take H8, cushion and other fittings from the package. First open the footrest (see Figure 1- ① ),

then unfold the body (see Figure 1- ② ). Align the screw hole below joystick base with the mounting

hole in front of the armrest and then tighten the fixing screw to fix it (see Figure 2).

Cover the cushion with seat holder (see Figure 3- ③ ), adjust it to the suitable place and do up the

inner two buttons. Fix the seat cushion on the seat holder and do up the outside two buttons, then

fix the seat cushion on the upper frame. Lay ﬂat the cushion and use the buckle stop to fix the upper

frame (see Figure 3- ④ arrow).

⑤

Figure 4

Put the backrest cross bar into the wheelchair body (see Figure 4- ⑤ ) and use thumb

screw to fix (see Figure5- ⑥ ).

Pull out the safety pin (see Figure 6- ⑦ ) and push the battery case along the safety pin to install

the battery. Insert the safety pin at the bottom of the battery mounting holes and tighten the set screw

(see Figure 7- ⑧ ). Then install the plug and socket together (see Figure 8).

Figure 2

Thumb screw

⑥

Figure 5

Set screw

⑧

Figure 7

Buckle stop

Seat holder

Upper frame

Fixing screw

⑦

Figure 6

Plug

Socket

Figure 8

- 02 -

④

③

Figure 3

Safety pin

Figure 9