Great Lakes GL24SRD Installation Instructions Manual - Page 5
Browse online or download pdf Installation Instructions Manual for Racks & Stands Great Lakes GL24SRD. Great Lakes GL24SRD 8 pages. 19" eia srd swing rack
Also for Great Lakes GL24SRD: Installation Instructions Manual (12 pages)
Print Page
SPECIFICATIONS
PART NO.
GL24SRD
GL36SRD
GL48SRD
Certifications: UL Listed
Construction: Body: 12 gauage steels; Rails: 12 gauage steel
Finish: Black Powder Coat
Grounding: Studs located on mounting channel
Rail Type: #10-32 UNF Tapped
Total Maximum Load Capacity: 100 lbs. for all sizes
5
form # MS-5.02-14
24.0"
Receiving, Unpacking, and Removing the SRD Swing Rack
Inspect and report damage before receiving. Unpack the SRD Swing
Rack by carefully removing the corrugated cartons and corners. Avoid
damaging the SRD Swing Rack when removing packaging.
WARNING: Only trained service personnel should be used to remove
the SRD Swing Rack from the carton. Also, be sure you have a sufficient
RIGHT SIDE VIEW
number of service personnel. Do not attempt to mount the SRD Swing
Rack by yourself.
5
H
24.12"
36.37"
49.62"
4
#10-32 UNF Tapped
Holes for Equipment
3.5
#12-24 UNC, TAPPED HOLES FOR
EQUIPMENT MOUNTING
Mounting
3.0
.250
.562
DETAIL A
TYP, WALL MOUNTING SLOTS
THIRD ANGLE
PROJECTION
4
W
20.62"
20.62"
20.62"
3
Provisions for Optional
PROVISIONS FOR OPTIONAL
CM-01 - Cable Cinch
CM-01 - CABLE CINCH STRAPS
Straps
SPECIFICATIONS:
RACK SPACES : 19" EIA 310-E COMPLIANT - SEE CHART
WEIGHT CAPACITY: 100 LBS - EVENLY DISTRIBUTED.
FINISH: DURABLE TEXTURED BLACK POWDER COATING.
CERTIFICATIONS: UL 60950-1 STANDARD FOR I.T. & COMMUNICATIONS EQ.
CONSTRUCTION: #12 GA. C.R.S. MOUNTING CHANNELS & SUPPORT FRAME.
USABLE DEPTH: 22" FROM MOUNTING SURFACE
HARDWARE: PACKAGE OF QTY-50; #12-24 SCREWS INCLUDED.
PART NUMBER
24SRD3200
36SRD3200
48SRD3200
INTERPRET DRAWING PER ASME Y14.5M-1994
DIMENSIONAL LIMITS APPLY
Use of this document is subject to
AFTER APPLICATION OF FINISH
a confidentiality and nondisclosure
DRAWING NOT TO SCALE
TOLERANCE UNLESS OTHERWISE NOTED:
agreement with Great Lakes Case
ANGULAR +/- 1
& Cabinet Co., Inc. (GLCC) and may
.XXXX +/- .010
not be reproduced, disclosed or
.XXX +/- .015
.XX +/- .030
utilized in whole or in part without
.X FOR REF. ONLY
prior written authorization from GLCC.
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS ARE IN INCHES
3
D
24.00"
24.00"
24.00"
2
RACK PIVOTS FROM EITHER SIDE
RMU TOTAL
H - HEIGHT
12
19
26
NOTICE:
PART NUMBER:
QTY PER UNIT:
1
MATERIAL TYPE:
-
MATERIAL GAUGE:
-
FINISH:
SEE NOTES
DRAWN
DATE
MZ
1/11/2011
CHECKED & APP.
DATE
1/11/2011
WSS
2
RMU
12
19
26
1
23.97
36.22
48.47
TITLE
SWING RACKS - DEEP
GREAT LAKES CASE & CABINET CO., INC.
P.O. BOX 551 EDINBORO, PA 16412
PHONE (814) 734-7303 FAX (814) 734-3907
E-MAIL [email protected]
DWG NO:
REV
I013250
0
SHEET:
1
1
5
D
C
B
A
OF
1