Hi-Force TLE5010 Operating Instructions Manual

Browse online or download pdf Operating Instructions Manual for Jacks Hi-Force TLE5010. Hi-Force TLE5010 18 pages.

Print Page

This 'Original instructions' document assumes that the operator carrying out any operation with this

product is trained and competent to do so. This manual does not attempt to cover all details or variations

in the equipment. Nor does this manual claim to provide for every possible contingency met in connection

with the installation, operation, or maintenance thereof. Should further information be desired, or should

a particular problem arise which is not covered in sufficient detail, the matter should be referred to

Hi-Force.

OPERATING INSTRUCTION MANUAL

TLE50 SERIES | TOUGHLIFT JACKING SYSTEM

Hi-Force TLE50 series Electric Driven ToughLift Jacking Systems are designed to be an easy to operate,

all-in-one electric-powered jacking system. The mobile unit is easy to manoeuvre and the combination of

an adjustable handle and the 'V-Lift' system facilitates easy, accurate positioning of the lifting cylinder under

the load. Available with a 254mm or 355mm stroke length, the units have a lifting capacity of 50 tonnes at

a maximum operating pressure of 700 bar (10,000 psi). This manual applies to the Hi-Force TLE50 series

Electric Driven ToughLift Jacking Systems Only. It contains the latest product information available at the

time of publication and approval. For information relating to the servicing of an Electric Driven ToughLift,

see the servicing instructions, which are available on the Hi-Force website. Hi-Force reserves the right to

make changes to this document at any time without notice.

Operating Instruction Manual:

OM-TLE50-01

- ELECTRIC DRIVEN

From Serial Number:

All