Great Lakes GL840EZ-3042 Installation Instructions Manual - Page 4

Browse online or download pdf Installation Instructions Manual for Racks & Stands Great Lakes GL840EZ-3042. Great Lakes GL840EZ-3042 17 pages. Ez seismic cabinet

Print Page

Loading Equipment

WARNING: Only install equipment after the EZ cabinet has been

properly secured. Do not move the EZ cabinet assembly while loaded.

Rated or maximum load capacity for the EZ cabinet is 1000 lbs. (3000

lb. non-seismic weight capacity). Cabinet must be secured to floor

using the included AK101 Seismic Anchor Bolts.

To maintain a uniform distribution of the mechanical load in the EZ

cabinet, load the heaviest equipment first, at the bottom of the

EZ cabinet and load the lighter units at the top.

OPERATING DOOR HANDLE

The door swing handles have been installed at the manufacturer.

No additional assembly is required. The EZ doors have a three point

latching system. To operate the swing handle, lift up at the bottom

of the handle then swing the handle to the right to open. The handle

must be kept in this position to close the door. Return the handle to

the initial position and use the key provided to lock the handle.

Important note: Doors are reversible, but require

an additional hinge kit. Please contact your

distributor/Great Lakes representative for the

EZ Hinge Kit.