6KU COMMUTER Build Manual - Page 8
Browse online or download pdf Build Manual for Bicycle 6KU COMMUTER. 6KU COMMUTER 16 pages.
Print PageINSTALLING THE
HANDLEBAR
a.
To start, remove the remaining
packaging from the handlebar.
b.
Now, stand over your bike and using
your 6mm Allen Key, loosen the stem's
top bolt.
c.
Set the stem to your desired height
and align the stem to the center of the
(the stem and front wheel
front wheel
should be parallel)
d.
While still holding the stem, tighten
the top bolt into place with your 6mm
Allen Key.
(please note that there is
a minimum insertion mark on the
quill stem, be sure that your desired
height is well below this line)
e.
Cut the string off that holds the
crankset and rear wheel in place and
remove all packaging on the crankset.
7