Gaggenau CX480 Instruction Manual - Page 11
Browse online or download pdf Instruction Manual for Cooktop Gaggenau CX480. Gaggenau CX480 20 pages. Full surface induction cooktop
Also for Gaggenau CX480: Installation Instructions Manual (20 pages)
Print Page
Touch the G symbol. The set cooking time has
4
been applied. The cooking time starts conunting
down in the display.
K
PLQ
When the cooking time has
elapsed
When the cooking time has elapsed, the cooking
position switches off. A signal sounds. 00.00 ‹ and
power level 0.0 light up in the cooking position
display.
Note: You can set a cooking time of up to 9 hours and
59 minutes. Depending on the power level set, the
cooking position may also switch off before the
cooking time has elapsed. See section
down
.
To correct the cooking time: select the cooking
position and touch the 6 symbol. Reset the cooking
time. To apply the cooking time, touch the G symbol.
To delete the cooking time: select the cooking
position and touch the 6 symbol. To delete the
cooking time, return to 00|00 ‹ and touch the G
symbol.
Safety shut-down
If a cooking position is in use for a long time without
the settings being changed, the safety shut-down is
activated.
The cooking position switches off. "
in use for too long
" appears in the display. Touch the
G symbol. The display goes out. You can make new
settings.
When the safety shut-down is activated depends on
the power level which has been set. For more
information, see section
PLQ
Safety shut-
Cooking position
Resolving malfunctions
Transferring settings
Short-term memory
As soon as you lift the cookware or move it on the
cooktop, all settings of the cooking position are saved
for a short time (10-90 seconds). The cooking position
K
does not heat.
Note: For the duration of the short-term memory, you
can change the settings of the cooking position
(exception: booster function and timer).
Place the cookware back onto the same position
within the duration of the short-term memory. The
settings are automatically applied. The cooking
position heats up.
Notes
‒
If the position differs significantly from the
original position, use the transfer function
‒
To find out how to change the duration of the
short-term memory, see section
Transfer function
With this function, you can transfer the settings of one
cooking position to another cooking position.
1
Place the cookware at another position on the
cooking surface within the duration of the short-
term memory. The new cooking position is
detected.
.
K
PLQ
Options menu
.
11