Dynabrade 50324 Quick Start Manual - Page 4

Browse online or download pdf Quick Start Manual for Sander Dynabrade 50324. Dynabrade 50324 4 pages. 4 1/2"- 5" pistol grip disc sander

Print Page

Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade

Disassembly/Assembly Instructions

To Assemble:

1. Place machine housing in soft jaw vise. Be sure not to over tighten to prevent damage.

2. Install motor assembly into housing.

3. Screw 55029 Cover onto housing turning counterclockwise. Torque to 28 N•m/250 in. - lbs.

4. Replace 57066 Muffler Body.

5. Replace 56028 Muffler Cap onto muffler body.

6. Apply a small amount of #271 Loctite

7. Lubricate motor by applying 2 or 3 drops of Dynabrade Air Lube P/N 95842 (or equivalent) into air inlet.

8. Complete assembling by remounting Disc assembly or Roloc

Tool Assembly Complete. Please allow 30 minutes for adhesives to cure before operating tool.

Important: Motor should now be tested for proper operation at 90 PSIG. If motor does not operate properly or operates at a higher RPM than marked on the

tool, the tool should be serviced to correct the cause before use. Before operating, place 2-3 drops of Dynabrade Air Lube (P/N 95842) directly into air inlet

with throttle lever depressed. Operate tool for 30 seconds to determine if tool is operating properly and to allow lubricating oils to properly penetrate motor

Loctite

is a registered trademark of Loctite Corp.

Dynaswivel

Swivels 360° at two locations which

allows an air hose to drop straight to the

floor, no matter how the tool is held.

•

94300 1/4" NPT

4" Diameter Scotch-Brite Roloc Discs

Grit

Part No.

4" Dia. Regalite Polycut 785C Roloc Discs

Grit

4" Disc Unit = 100 Discs

Part No.

Visit Our Web Site: www.dynabrade.com

DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1490 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524

DYNABRADE EUROPE S.àr.l.,

Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade

(or equivalent) to the threads of 56023 Inlet Bushing. Install inlet bushing into housing torque 23 N•m/200 in. - lbs.

Pad and 53163 Side Handle.

Accessories

Abrasives

Medium

Coarse

90868

90867

90863

92047

92049

92050

Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1

PRINTED IN USA

(continued)

96047 Motor Tune-Up Kit

4-1/2" Ceramic Coated Aluminum Oxide Discs

Flange Mounted / 5/8" Center Hole

Grit

Part No.

Unit = 100 Discs

Spiralcool is a registered trademark of Spiralcool Co.

Regalite, Scotch-Brite and Roloc are registered trademarks of 3M Co.

Email: [email protected]

•

Includes assorted parts to

help maintain and repair motor.

100

120

92052

92053

92054

92055

DYNABRADE

PD07.29_08/07