Airwheel SE3T User Manual - Page 8
Browse online or download pdf User Manual for Carrying Case Airwheel SE3T. Airwheel SE3T 12 pages.
Print PageCustom coded lock instruction
The original password is 0-0-0, set your own password,
follow these steps:
1.Dial the password to the original password: 0-0-0;
2.Press the button A with a pen or other tool until you
hear the 'tick' sound;
3.Dial the password wheel B to set your own password,
for example: 8-8-8;
4.Push button C in the direction of the arrow and hear the "tick"
sound again. Button A pops up and the password is successfully set.
Now you have completed your password setup, please keep it in
mind. If you need to reset your password, repeat the above steps.
Power switch indicator
Flash 1: Motor stall
Flash 2: Low battery
Flash 3: Turn the fault
Flash 4: Battery undervoltage
Maintaining
Appearance cleaning
1.
Vehicles need to be cleaned at any time.
2.
When cleaning dust, do not wipe the electrical parts and connectors with a damp cloth.
Other maintaining
1.
Lubricate the front and rear axles once every six months.
2.
Check and tighten contact of electrical connectors.
3.
Whether the brake is workable.
Safety
For all the precautions in the SE3T riding, please be sure to read and ride the SE3T as required. Do not use
this product until you have read the instructions carefully to understand the performance of SE3T; do not lend to
anyone who does not manipulate this product.
Very important
It is strictly forbidden to accelerate, decelerate and sharply turn. It is strictly forbidden to ride at speed (the speed
is too fast); please keep at a low speed during the riding. If there is a risk of falling, please protect your personal
safety and do not consider the SE3T. The SE3T may cause wear and tear during riding and parking, which may
affect the performance of the product. Therefore, before you ride the SE3T, you must do the following checks:
- 07 -
Power button