7 A.M. Enfant TEDDY BEBEPOD User Manual - Page 2

Browse online or download pdf User Manual for Baby Carrier 7 A.M. Enfant TEDDY BEBEPOD. 7 A.M. Enfant TEDDY BEBEPOD 2 pages.

Print Page
FRONT
HOW TO USE ON STROLLER
HOW TO USE ON CARSEAT
HOW TO ONLY USE FRONT PANEL COVER
On Stroller
On Car Seat
WARNING:
Never leave child unattended in this product. Make sure that the child's face is not covered by any part of this product. Child should never be placed face-down in
this product. Do not use this product as sleepwear or bedding. The child should not put buttons, plastic ends, snaps or other parts of this product into her/his mouth. Always use
care when using zippers to avoid injury to the child. Failure to follow any warning may result in death or serious injury to the child. 7AM does not hold itself liable for any injury.
User Manual
BÉBÉPOD
TEDDY COLLECTION
BREATHABLE TEDDY SHELL
PANEL COVER ONLY
Place the BébéPOD onto the
1
3
stroller.
Optional: Slip the pouch located
2
behind the hood over the top of the
stroller to secure the BébéPOD's
4
stability.
1
1
Seat your child in the stroller or car
seat and fasten the safety harness as
per their manufacturer's instructions.
Unzip the front panel cover. Save the
2
BébéPOD's back for later use.
Slip the front panel's inner bottom
3
pouch over the bottom of the stroller
or car seat to secure the cover.
The BébéPOD is machine washable. The care label
is located on the back side of the product.
Use the hook & loop straps located
5
Pull the stroller's 5-point harness
on the sides of the BébéPOD to
through the opening slits located on
attach to the stroller's back or
the back of the BébéPOD by choosing
sidebars in order to secure it.
the height of the slits corresponding
to your child's size.
Unzip the BébéPOD cover.
Seat your child on the BébéPOD in the
6
stroller and fasten the safety harness
as per manufacturer's instructions.
Detach the removable back panel to
2
Place the BébéPOD onto the car seat
reveal the large back opening and to
and unzip the front panel to open the
eliminate material between your
BébéPOD.
baby's back and the car seat. Store it
Pull the car seat's 5-point harness
3
for stroller use.
through the large back opening.
Pull the elastic drawstring under the
4
pouch to adjust tightness.
BACK
Zip the BébéPOD cover up and adjust
7
the snugness using the elastic
drawstring located underneath the
top flap to create a smaller
enclosure around your child's face.
To further envelop your child's head,
8
connect the side flaps to the hood
with the hook & loop fasteners.
4
Seat your child on the BébéPOD in
the car seat and fasten the safety
harness as per manufacturer's
instructions.
5
Zip the BébéPOD cover up.
Use the hook & loop straps located on
5
the sides of the front panel cover to
attach to sidebars.
6
Use the elastic drawstring located
underneath the top flap to adjust the
snugness.