Dynabrade 52597 Manual - Page 8

Browse online or download pdf Manual for Sander Dynabrade 52597. Dynabrade 52597 8 pages. 7" vacuum right angle sanders

Print Page

MACHINE SPECIFICATIONS

Model

Power

Speed

1.3 hp

52597

6,000 RPM

(969 W)

Additional Specifications: Air Inlet Thread 3/8" NPT • Hose I.D. 3/8" (6 mm)

Sound Level is the pressure measurement according to the methos outlined in ISO regulation ISO-15744

Dynaswivel

•

Swivels 360° at two locations which allows an

air hose to drop straight to the floor, no matter

how the tool is held.

Part No. 95461 3/8" NPT.

Dynabrade Angle Gear Oil

•

Specifically formulated to saturate wick system in right

angle gear head.

Part No. 95848: 2.5 oz. tube

Part No. 95541: Gear Oil Gun

Male Plug - 3/8" NPT

•

Provides up to twice the air flow

compared to standard plug design.

•

Plug has "ported" design to prevent

"starving" of the air tool.

Part No. 98263

Expect a gear life

Apply 2-3

of 500 hours

plunges into

lubrication

minimum, with

fitting every

proper lubrication.

24 hours of

operation.

REFERENCE CONTACT INFORMATION

American National Standards Institute (ANSI)

www.ansi.org

Compressed Air & Gas Institute (CAGI)

www.cagi.org

European Committee for Standardization (PNEUROP)

www.pneurop.org

DYNABRADE, INC.

8989 Sheridan Drive • Clarence, NY 14031-1419 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524

Sound Level Air Consumption

40 SCFM

76 dB(A)

(1,133 LPM)

• Lubricate wick system through the angle gear oil fitting with 2-3 plunges for every 24

hours of use, to achieve maximum gear life. Prime pump to insure good oil flow.

Important: Use only the recommended angle gear oil for the wick system.

Do not contaminate the wick with any other oil or grease product. Insure that all 3 plunges of

oil are injected through the fitting.

(Order 95848 Gear Oil and 95541 Gun)

International Organization of Standards (ISO)

www.iso.org

U.S. Government Publishing Office (GPO)

www.gpo.gov

Spindle

Air Pressure

Weight

Thread

90 PSIG

5.8 lb.

5/8"-11 Male

(6.2 Bars)

(2.6 kg)

Motor Tune-Up Kit

•

Part No. 96100

www.dynabrade.com

Length

Height

14.6"

3.9"

(373 mm)

(104 mm)

Includes assorted parts to help

maintain and repair motor.

Dynabrade Air Lube

•

Formulated for pneumatic equipment.

•

Absorbs up to 10% of its weight in water.

Part No. 95821: 4oz. (118 ml)

Part No. 95842: 1pt. (473 ml)

Part No. 95843: 1gal. (3.8 L)

Wrenches

Part No. 98283 - Open End (1-5/8")

Part No. 95281 - Open End (19mm)

Part No. 95049 - Hex Key (3/16")

Additional Repair Tools (Not shown)

Part No. 96244 - Bearing Press Tool

Part No. 96243 - Bearing Press Tool

Part No. 96346 - Bearing Separator

Part No. 96208 - Repair Collar