Dynabrade 53523 Safety, Operation And Maintenance Instructions - Page 8
Browse online or download pdf Safety, Operation And Maintenance Instructions for Sander Dynabrade 53523. Dynabrade 53523 9 pages. 1 hp extension polishers
Print Page®
Dynaswivel
•
Swivels 360° AT TWO PIVOT POINTS allowing the air hose to
drop directly to the floor while providing superb tool handling.
95461 – 3/8" NPT.
51989 Repair Collar
•
Specially designed collar for use in vise to prevent damage
to valve body of tool during disassembly/assembly.
Dynabrade Air Lube
•
Formulated for pneumatic equipment.
•
Absorbs up to 10% of its weight in water.
•
Prevents rust and formation of sludge.
•
Keeps pneumatic tools operating longer
with greater power and less down time.
95842: 1pt. (473 ml)
95843: 1gal. (3.8 L)
96209 Motor Repair Clamp
•
Specially designed clamp to secure motor cylinder
before disassembly.
96005 Male Plug
•
Provides up to twice the air flow
compared to standard plug design.
•
Plug has "ported" design to prevent
"starving" of the air tool.
Bearing Press Tools
•
Used to install bearings.
96243: For installing 02057 Bearing.
96244: For installing 01007 & 54520 Bearings.
REFERENCE CONTACT INFORMATION
American National Standards Institute (ANSI)
1899 L Street, NW, 11th Floor • Washington, DC 20036 • Tel: 1 (202) 293-8020
Compressed Air & Gas Institute
1300 Sumner Ave. • Cleveland, OH 44115-2851
Tel: 1 (216) 241-7333 • Fax. (216) 241-0105
European Committee for Standardization
Rue de Stassart 36 • B - 1050 Brussels, Belgium
DYNABRADE, INC.
8989 Sheridan Drive • Clarence, NY 14031-1419 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
© DYNABRADE, INC., 2014
Optional Accessories
96532 Motor Tune-Up Kit
•
Includes assorted parts to help maintain
and repair motor.
01905 Drop-In Motor (3,400 RPM)
•
Allows quick and easy replacement.
No motor adjustments needed.
53621 Over Hose Assembly
•
Over Hose Assembly directs exhaust
away from operator.
Dynabrade Grease
•
Multi-purpose grease for all types of
bearings, cams, gears.
95542: 10 oz. tube
95541: Push-type Grease Gun
Wrenches
96453 – 16 mm open-end.
53698 – Carrier Wrench.
96347 – Pin Wrench
53199 Collar
•
To reduce operator fatigue use collar
to mount suspension device.
International Organization of Standards
Case postale 56 • CH-1211 Geneva 20
Tel: + 41 22 749 01 11 • Fax: + 41 22 749 09 47
Government Printing Office
Superintendent of Documents • Attn: New Orders
P.O. Box 371954 • Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
www.dynabrade.com
PD08.26R_Rev.2_03/14